|
Contents > RUNNING Active@ KillDisk
Users Guide
Autoexecute Mode
You can start Active@ KillDisk for Hard Drives with a DOS
auto-executable batch file. Include the command line containing call of the
program and parameters.
Follow these steps:
-
In the Microsoft DOS screen, open a new autoexec.bat file or edit an existing
one with the following command:
A:\>edit autoexec.bat
The Microsoft DOS file edit screen appears.
-
Enter the command line and parameters as needed. Here is an example:
killdisk -erasehdd=80h -erasemethod=6 -passes=1 -ignoreerrors
In the example above, the first detected hard disk will
be erased in one pass. Confirmations will be encountered and errors will be
ignored.
-
Save the autoexec.bat file in the root directory of the system floppy disk and
exit the edit utility.
-
Remove the floppy from this floppy drive.
-
The floppy is now ready for automatic data erasing. To erase data using Autoexecute
Mode, follow these steps:
-
Go to the machine that requires data erasing
-
With the PC power off, insert the Active@ KillDisk for Hard Drives Automatic
Mode floppy disk into drive A:
-
Start the PC by turning on the power.
-
The PC will indicate booting into DOS. The data erase process will begin.
Previous <
Contents > Next
|
